Vonaq Easycheck 900
Low Cost Ethernet LAN and Cable testerThe Vonaq Easycheck 900 is an innovative LAN and cable Tester that is the perfect tool to assist you with your LAN and wiring endeavours. Using this tool you will rapidly identify continuing problems such as such as shorts, open wires, reversed pairs, crossed pairs and miswiring. Resolving LAN problmes is simple using the easy to use PING, DHCP and Net Scan tests.
Typical Applications
Cable Testing
In Cable Testing mode the EasyCheck 900 LAN tester / Cable Tester quickly identifies continuity problems such as shorts, open wires, reversed pairs, crossed pairs and miswiring.
Cable Length Testing
The EasyCheck 900 LAN Tester / Cable tester’s Cable Length Test very quickly measures cable length on each pair.
Tone Generation
The EasyCheck 900 LAN Tester has a Tone Generation function for cable tracing.
Device ID Test
The Device ID test of the LAN Tester identifies what equipment is connected to the other end of the cable.
If a Voltage is found, this and the likely connection type is reported on the LAN Tester’s display screen e.g. Telephone or POE ( Power over Ethernet).
If no voltages are present, the Ethernet type is reported e.g. 10M/100M or 1000M, Hub or NIC, Auto MDI/MDI-X.
Ping and DHCP Test
Fast and effective network testing is performed. This LAN tester can auto configure using DHCP then ping to an end point (perhaps a location on the internet), plus ping the DHCP and DNS servers.
Flash Link LED Test
To assist with trouble shooting, the ” Flash Link LED ” Test function of the LAN Tester will cause the appropriate port LED on the connected Ethernet hub or switch to flash. This can be used to identify what cable maps to each Ethernet hub port.
Net Scan Test
The Net Scan feature of the EasyCheck 900 LAN Tester also allows you to identify the number of devices on the Ethernet network and report their IP and MAC address.
Specification
- Support 10M/100M/1000M Ethernet RJ45.
- Identifies speeds 10M / 100M/ 1000M, duplex mode full or half.
- Simultaneously Pings three devices at once: a target, a router and a DNS server
- Displays length measurement for each pair in feet or meters
- Full wiremap cable tests with display of PASS, wiremap and faults for opens, shorts, miswires, and split pairs
- Cable Types: shielded or unshielded, CAT6 Cat5E, CAT5, CAT4, CAT3
- Minimum cable length for testing for split pairs: 1 meter (3 feet)
- Minimum cable length for single-ended cable test: 1.25 meter (4 feet)
- Length measurement range (CAT5 and CAT6): 0 to 457 meters (0 to 1500 feet)
- Display MAC address and IP address on Net Scan test
Accessories
| EasyCheck 900 Kit | EasyCheck 900 Standard Unit |
|---|---|
| 8 x Remote Responder | 1 x Remote Responder |
| 1 x Tone Tracer | |
| 2 x RJ45 Crocodile Lead | 2 x RJ45 Crocodile Lead |
| 2 x RJ11 to RJ11 Lead | 2 x RJ11 to RJ11 Lead |
| User Guide | User Guide |
| Soft Carry Case | Soft Carry Case |
General features
- 128 x 64 Dot Matrix LCD with backlight
- Battery Life: 2.5 years (Standby)
50 hours Cable testing and no backlight
15 hours Network testing and no backlight
- Tests on 10M/ 100M and 1000M Ethernet
- Cable length test and wire map test
- Generates tone levels for Cable tracing
- Ping to destination, DHCP server and DNS Server
- DHCP to obtain network information
- Combined DHCP and Ping Test makes
- IP layer testing quick and easy
- Identifies hubs, NICs or auto MDI/MDI-x devices
- Blinks link indicator to identify ports on hubs or router N
- Net Scan to identify what is on the network
