MP1900A
BERT Test - 100 GbE/200 GbE/400 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fibre Channel, PCI Express Gen 1 to 5, Thunderbolt 3, USB3.1 Gen1/2, Optical modules, SERDES, AOC, High-speed InterconnectsTo cope with increasing data traffic caused by the widespread popularity of smartphones and mobile terminals, data-center network interfaces are being transitioned to the faster 200 and 400 GbE standards, while communications-equipment interconnects are adopting PCI Express Gen4 supporting faster speeds of 16 Gbit/s; multi-channel technologies are also being deployed.
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high-performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG/ED, 32G/64G PAM4 PPG, 32G PAM4 ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
[Target Applications]
100 GbE/200 GbE/400 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fibre Channel, PCI Express Gen 1 to 5, Thunderbolt 3, USB3.1 Gen1/2, Optical modules, SERDES, AOC, High-speed Interconnects
Item | Specification |
---|---|
Operation Bit Rate: | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
No. of Channels: | 1 or 2 |
Output Amplitude: | 0.1 Vp-p to 1.3 Vp-p (Single-end) 0.2 Vp-p to 2.6 Vp-p (Differential) |
Emphasis: | 10Tap |
Channel Emulator: | Normal: Emulates Insertion Loss using S-parameters Inverse: Performs De-Emphasis compensation for S-parameter Insertion Loss S-Parameter file: S2P,S4P |
ISI: | Emulates output for ISI using CEI-28G/25G Nyquist frequency loss setting
Supports loss control in combination with J1758A ISI Board accessory
Insertion Loss setting:1.5 to 25 dB, 0.01 dB step, Nyquist frequency
0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency |
Tr/Tf (20% – 80%): | 12 ps (typ.) |
Random Jitter: | 115 fs rms (typ.) |
PCIe Link Training: | Supported (MX183000A-PL021) |
I/O Connector: | K (f) |
- 21G/32G bit/s SI ED MU195040A
Item | Specification |
---|---|
Operation Bit Rate | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
No. of Channels | 1 or 2 |
Input Amplitude | 0.05 Vp-p to 1.0 Vp-p (Single-End) 0.1 Vp-p to 2.0 Vp-p (Differential) |
Input Sensitivity | 15 mV (Eye Height 28.1 Gbit/s) |
CTLE | Peak Frequency 14, 8, 4 GHz Gain 0 to –12 dB |
Clock Recovery | Yes, SSC support |
PCIe Link Training | Supported (MX183000A-PL021) |
I/O Connector | K (f) |
- PAM4 PPG MU196020A
Item | Specification |
---|---|
Operation Rate (PAM4/NRZ) | PAM4: 2.4 to 32.1 Gbaud, 58.2 Gbaud, or 64.2 Gbaud NRZ: 2.4 to 32.1 Gbit/s, or 58.2 Gbit/s, or 64.2 Gbit/s Upper limit as option selections |
No. of Channels | 1 |
Output Amplitude | 70 mVp- to 800 mVp-p (Single-end) 140 mVp- to 1600 mVp-p (Differential) |
Offset | -2 V to +3.3 V |
PAM4 3Eye Independently Variable | 20 to 50% (PAM4 Amplitude 0/3 level = 100%) |
Emphasis | 4 Tap, -20 to +20 dB |
PAM4 Pattern | SSPRQ, PRBS13Q, PRBS31Q, etc. |
PAM4 Pattern Error Addition | Error on MSB, Error on LSB, Error on LSB&MSB |
Tr/Tf (20 to 80%) | 8.5 ps (typ., NRZ) |
Random Jitter | 170 fs rms (typ., NRZ) |
I/O Connector | V (f) |
- PAM4 ED MU196040A
Item | Specification |
---|---|
Operation Rate (PAM4/NRZ) | PAM4: 2.4 to 32.1 Gbaud NRZ: 2.4 Gbit/s to 32.1 Gbit/s |
No. of Channels | 1 |
Input Amplitude | PAM4: 300 mVp-p to 1000 mVp-p NRZ: 50 mVp-p to 1000 mVp-p |
Input Sensitivity | PAM4: 23 mV (typ., PRBS31, Eye height for each Eye, 26.5625 Gbaud) NRZ: 23 mV (typ., PRBS31) |
Stressed Margin | BER < 1E-12 (At PAM4 Stressed waveform input refer to CEI-56G-VSR) |
Clock Recovery | Yes (25.5G to 32.1G) |
PAM4 Pattern | SSPRQ, PRBS13Q, PRBS31Q, etc. |
PAM4 Counter | MSB/LSB, Symbol 0 to 3 |
I/O Connector | K (f) |
- Noise Generator MU195050A
Item | Specification |
---|---|
No. of Channels | 2 |
Insertion Loss | -3 dB |
CMI | 0.1 GHz to 1 GHz/1 GHz to 6 GHz |
DMI | 2 GHz to 10 GHz |
White Noise | 10 MHz to 10 GHz |
Crest Factor | >5 |