FieldSENSE 2.0 RF Personal Monitor
Description
The FieldSENSE 2.0 is the next generation in Personal RF Monitors specifically designed for protecting personnel working near broadcast and telecommunications transmitting antennas from EMF overexposure.
RF Safety – We’ve got you covered – So affordable, every worker can carry one
Recommended retail price: EUR €759
The FieldSENSE 2.0 Personal RF monitor has it all:
• 50MHz to 6GHz, E & H fields
• Robust/waterproof (IP64 enclosure)
• Fall-detect, sound an alarm should you accidentally fall !
• Voice notes to record job notes
• Data logging, records all levels/measurements during the job, you can access them easily over a USB connection to your PC in the office, or can view data real-time over the USB connection (with the free PC application).
• Calibration is only required every two years, a turnaround of approximately 1 week. Cost €80 (ex delivery).
• AAA Batteries, tend to last up to 6 months or more depending on usage.
• Approved by Arqiva, MBNL and BT. (See Arqiva web site for SHE001 approval)
• Meets all the relevant safety standards see attached data sheet.
• Robust/waterproof (IP64 enclosure)
• Fall-detect, sound an alarm should you accidentally fall !
• Voice notes to record job notes
• Data logging, records all levels/measurements during the job, you can access them easily over a USB connection to your PC in the office, or can view data real-time over the USB connection (with the free PC application).
• Calibration is only required every two years, a turnaround of approximately 1 week. Cost €80 (ex delivery).
• AAA Batteries, tend to last up to 6 months or more depending on usage.
• Approved by Arqiva, MBNL and BT. (See Arqiva web site for SHE001 approval)
• Meets all the relevant safety standards see attached data sheet.
• €759 (a fraction of it’s rival’s cost).
Features
Frequency range: 50 MHz - 6 GHz
Only RF monitor you will ever need, Covers all typical television and FM radio broadcast services and all mobile telecommunications services amongst others. (link to full resolution page)
E & H fields measured
In order to accurately assess a given exposure situation, both H and E fields are measured.Shaped response
The exposure limits, such as the FCC (NCRP), SC6 or ICNIRP are ALL shaped over frequency and as such PPE must also have a shaped probe response to accurately measure in accordance with it. frequency bandsIsotropic
The FieldSENSE 2.0 has a total of 6 orthogonal E & H field probes to ensure that the combination of all sources of radiation from all angles are correctly measured and assessed in accordance with the safety limits.Data logging
The FieldSENSE 2.0 now has an advanced E & H field data logger which records all your measurements so that you can access them easily over a USB connection to your PC in the office. You can even view data real-time over the USB connection with the PC application. *See images belowFall-detect & alarm - Designed for tower climbers - it could save your life
Inbuilt fall detection system will sound an alarm should you accidentally fall. This will attract the attention of colleagues to immediately initiate rescue actions.Harness fastening
Special strap & buckle system for fastening your device to your climbers harness ensures easy access to it. Specifically designed to keep it away from areas which are either heavily utilised or impede easy climbing.
Wrist strap
Easily adjustable wrist strap ensures you never accidentally drop your device when working at heights.
Guy wearing harness
"Grippy" design
Special bevelled design to fit tightly into your hand with a textured soft elastomer surface and grip ridges ensuring you don't have any fumble moments up in the air.Water resistant
Withstand heavy weather conditionsRobust Rugged IP64 enclosure
The FieldSENSE 2.0 has a special co-moulded enclosure with a base layer of polycarbonate which is typically used in riot shields, and an outer elastomer layer made of TPU which is designed for hard wearing environments. Zipper case with moulded foam insert Shipped in a heavy duty zipper case with a custom moulded insert makes for even further protection of your device.Voice notes
Match data with quick voice notes Record a serial numberTripod attachment
Remote monitoring Attach extension poleUses AAA batteries
Readily available AAA (LR03) batteries 6-12 Months battery life (medium usage)User interface
Bright LEDS, visible in sunlight Auto power off after 8 hours of inactivity. Single button operation Operate with glove Loud buzzer*Data logging
The FieldSENSE 2.0 now has an advanced E & H field data logger which records all your measurements so that you can access them easily over a USB connection to your PC in the office. You can even view data real-time over the USB connection with the PC application. Click on the link below to download the FieldSENSE connector software. Download now Use FieldSENSE software to view and extract exposure levels- View recorded E and H-fields.
- Example: E and H-fields zoomed in
- Example: E-and H-fields exported to TSV file
Resources
Enquiry
Enquire about this product