Anritsu MP1900 Signal Quality Analyzer-R
MP1900A series is an 8-slot modular, high-performance BERT supporting all-in-one Physical layer measurements of both high-speed network interfaces as NRZ and PAM4, and PCI Express/USB, bus interfacesTo cope with increasing data traffic caused by the widespread popularity of smartphones and mobile terminals, data-center network interfaces are being transitioned to the faster 200 GbE/400 GbE/800 GbE standards, while communications-equipment interconnects are adopting PCI Express Gen5 supporting faster speeds of 32 Gbit/s; multi-channel technologies are also being deployed.
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high-performance BERT with 8 slots for modules, such as PPG, ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
Target Applications
100 GbE/200 GbE/400 GbE/800 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fibre Channel, PCI Express Gen1/2/3/4/5, Thunderbolt 1/2/3, USB3.2/4 Type C, SAS-3/-4, DP1.4, Optical module, SERDES, AOC, High-speed Interconnect
- Signal Quality Analyzer-R MP1900A
| Item | Specification |
|---|---|
| LCD | 12.1-inch, WXGA 1280 x 800 |
| Remote Interface | GPIB, LAN |
| Module Slots | 8 |
| External Peripheral I/F | USB x6, VGA x1, HDMI x1 |
| OS | Windows Embedded Standard 7 |
| Power | 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac) 50 Hz to60 Hz |
| Power Consumption | 1350 VA max. |
| Dimensions/Mass | 340 (W) x 222.5 (H) x 451 (D) mm/20 kg max. (excluding modules) |
- Noise Generator MU195050A
| Item | Specification |
|---|---|
| No. of Channels | 2 |
| Insertion Loss | -3 dB |
| CMI | 0.1 GHz to 1 GHz/1 GHz to 6 GHz |
| DMI | 2 GHz to 10 GHz |
| White Noise | 10 MHz to 10 GHz |
| Crest Factor | >5 |
- PAM4 PPG MU196020A
| Item | Specification |
|---|---|
| Operation Rate (PAM4/NRZ) | 2.4 Gbaud to 32.1/58.2/64.2 Gbaud (option selection) |
| No. of Channels | 1 |
| Output Amplitude | 70 mVp- to 800 mVp-p (Single-end) 140 mVp- to 1600 mVp-p (Differential) |
| Offset | -2 V to +3.3 V |
| Emphasis | 4 Tap, -20 to +20 dB |
| Channel Emulator | Generates waveform with insertion loss and simulates waveform with corrected insertion loss Set by loading S-Parameter file (S2 P, S4 P) |
| ISI | Simulates ISI generation waveform Set using loss (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency Used in combination with channel board, such as J1800A/J1758A (optional accessories parts), or Noise Module MU195050A |
| Independently Variable PAM4 3 Eye | 20 to 50% (PAM4 Amplitude 0/3 level = 100%) |
| PAM4 Pattern | SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, etc. |
| PAM4 Pattern Error Addition | MSB Error, LSB Error, LSB&MSB Error, RS-FEC Symbol Error |
| Tr/Tf (20 to 80%) | 8.5 ps (typ., NRZ) |
| Random Jitter | 170 fs rms (typ., NRZ) |
| I/O Connector | V (f) |
- PAM4 ED MU196040B NEW
| Item | Specification |
|---|---|
| Operation Rates (PAM/NRZ) | 2.4 to either 32.1 Gbaud, or 58.2 (PAM4)/64.2 (NRZ) Gbaud (option selection) |
| No. of Channels | 1 |
| Input Amplitude | NRZ: ≤32.1G: 0.05 to 1.0 Vp-p; >32.1G: 0.1 to 1.0 Vp-p PAM4: ≤32.1G: 0.3 to 1.0 Vp-p; >32.1G: 0.4 to 1.0 Vp-p |
| Input Sensitivity (Eye Height) | NRZ: 19 mV @ 26.5625 Gbaud; 21 mV @ 53.125 Gbaud PAM4: 23 mV @ 26.5625 Gbaud; 36 mV @ 53.125 Gbaud |
| Clock Recovery (Option) | 2.4 to 32.1 Gbaud; 51 to 58.2 Gbaud |
| Equalizer (Option) | Low-frequency Equalizer (≤1 GHz, 2 dB typ.) + DFE (1.4 dB typ.) |
| PAM4 Patterns | SSPRQ, PRBS13Q, PRBS31Q, etc. |
| PAM4 Counter | MSB, LSB, Symbol 0 to 3 (Option) |
| Input Connector | V (f) |
- 21G/32G bit/s SI PPG MU195020A
| Item | Specification |
|---|---|
| Operation Bit Rate (NRZ) | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
| No. of Channels | 1 or 2 |
| Output Amplitude | 0.1 Vp-p to 1.3 Vp-p (Single-end) 0.2 Vp-p to 2.6 Vp-p (Differential) |
| Emphasis | 10Tap |
| Channel Emulator | Normal： Emulates Insertion Loss using S-parameters Inverse： Performs De-Emphasis compensation for S-parameter Insertion Loss S-Parameter file: S2P,S4P |
| ISI | Emulates output for ISI using CEI-28G/25G Nyquist frequency loss setting
Supports loss control in combination with J1758A ISI Board accessory
Insertion Loss setting：1.5 to 25 dB, 0.01 dB step, Nyquist frequency
0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency |
| Tr/Tf (20% – 80%) | 12 ps (typ.) |
| Random Jitter | 115 fs rms (typ.) |
| PCIe and USB Link Training | Supported（MX183000A-PL021/PL022/PL025） |
| Output Connector | K (f) |
- 21G/32G bit/s SI ED MU195040A
| Item | Specification |
|---|---|
| Operation Bit Rate (NRZ) | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
| No. of Channels | 1 or 2 |
| Input Amplitude | 0.05 Vp-p to 1.0 Vp-p (Single-End) 0.1 Vp-p to 2.0 Vp-p (Differential) |
| Input Sensitivity (Eye Height) | 15 mV (Eye Height 28.1 Gbit/s) 30 mV/Eye（28.1 Gbaud, PRBS15, PAM4） |
| CTLE | Peak Frequency 14, 8, 4 GHz Gain 0 to –12 dB |
| Clock Recovery | Yes, SSC support |
| PCIe and USB Link Training | Supported（MX183000A-PL021/PL022/PL025） |
| Ouput Connector | K (f) |
